
CY7C68300C, CY7C68301C
CY7C68320C, CY7C68321C
Document 001-05809 Rev. *B Page 2 of 42
Applications
The CY7C68300C/301C and CY7C68320C/321A implement
a USB 2.0 bridge for all ATA/ATAPI-6 compliant mass storage
devices, such as the following:
■ Hard drives
■ CD-ROM, CD-R/W
■ DVD-ROM, DVD-RAM, DVD±R/W
■ MP3 players
■ Personal media players
■ CompactFlash
■ Microdrives
■ Tape drives
■ Personal video recorders
The CY7C68300C/301C and CY7C68320C/321A support one
or two devices in the following configurations:
■ ATA/ATAPI master only
■ ATA/ATAPI slave only
■ ATA/ATAPI master and ATA/ATAPI slave
■ CompactFlash only
■ ATA/ATAPI slave and CompactFlash or other removable IDE
master
Additional Resources
■ CY4615C EZ-USB AT2LP Reference Design Kit
■ USB Specification version 2.0
■ ATA Specification T13/1410D Rev 3B
■ USB Mass Storage Class Bulk Only Transport Specification,
http://www.usb.org/developers/devclass_docs/
usbmassbulk_10.pdf
Introduction
The EZ-USB AT2LP™ (CY7C68300C/CY7C68301C and
CY7C68320C/CY7C68321C) implements a fixed-function
bridge between one USB port and one or two ATA- or
ATAPI-based mass storage device ports. This bridge adheres
to the Mass Storage Class Bulk-Only Transport Specification
(BOT) and is intended for bus and self powered devices.
The AT2LP is the latest addition to the Cypress USB mass
storage portfolio, and is an ideal cost- and power-reduction
path for designs that previously used Cypress’s ISD-300A1,
ISD-300LP, or EZ-USB AT2.
Specifically, the CY7C68300C/CY7C68301C includes a mode
that makes it pin-for-pin compatible with the EZ-USB AT2
(CY7C68300A).
The USB port of the CY7C68300C/301C and
CY7C68320C/321A (AT2LP) are connected to a host
computer directly or with the downstream port of a USB hub.
Software on the USB host system issues commands and
sends data to the AT2LP and receives status and data from
the AT2LP using standard USB protocol.
USB 2.0
Tranceiver
CY Smart USB
FS/HS Engine
4 kByte FIFO
PLL
I
2
C Bus Master
ATA
Interface
Logic
Data
Control
24
MHz
XTAL
16 Bit ATA DataUSB
D+
D-
Internal Control Logic
VBUS
ATA Interface
Control Signals
Misc control signals and GPIO
SDA
SCL
ATA 3-state Control
Reset
[+] Feedback
Komentáře k této Příručce